The Features of Mud Pumps

1. A capability of delivering slurry of high concentration and viscosity < 10000PaS with particles.

2. A stable liquid flow without over-current, pulsation and stirring, shearing.

3. An independent discharge pressure from the rotational speed. A High pressure still can be achieved with a low discharge.

4. A proportional discharge to the rotational speed. The discharge can be adjusted by the variator or the regulator.

5. A powerful self-priming ability. A direct liquid suction without any bottom valves.

6. Reversible rotation for a back-run flush. The direction of the liquid flow depends on that of the pump.

7. A smooth running with a slight vibration and a low noise.

8. A simple structure easy to be disassembled and maintained.

It is widely adopted by industries of chemical, pharmaceutical, brewing, paper, food and others.

Components are the mud pump cylinder liner, the top sleeve, the cylinder head, the pull rod, the piston and pressure plate, the leather bowl, the piston seat and rod, the plunger rod, inlet and outlet valves and seats, the cross head, the cross head sliding sleeve and pin, the crankshaft, the connecting rod and upper and lower bushes, the connecting rod copper sleeve, screw and nut, the crown nut, the skeleton sealing oil, the O-type sealing ring, the bearing, the assorted gear and shaft, etc. All these are prone to problems. The quality shall be ensured by manufacturers of mud pump China while the operational requirement shall be considered by the purchaser and the user.

SAIGAO, a supplier of China mud pumps, is reliable for the excellent production quality and the considerate service.